Ceiling Fan Installation and Repair in Greater Orlando
Need a ceiling fan installed or fixed today? Our licensed techs handle safe installs, replacements, and repairs with care. We serve the Greater Orlando area, including Orlando, Sanford, and Winter Park. Homeowners trust our 4.5 rating from 4,130 reviews, clear explanations, and low-pressure service. Schedule your visit now and feel the difference of a cooler, quieter room.
What can you expect to pay?
Typical price ranges.
Price ranges for this service based on Del-Air Heating, Air Conditioning, Plumbing and Electrical job history.
Why Choose Us
Skilled electricians
Clear communication
Fast scheduling
Trusted locally
No-pressure service
What Our Customers Say
quality
“Very knowledgeable and very thorough.”
communication
“Took the time explaining the process.”
professionalism
“Respectful of our home and no pressure.”
Installing a ceiling fan with existing wiring is usually a lower-cost job because the circuit and switch are already in place, but final pricing is confirmed after an on-site inspection. The biggest cost swings come from whether the existing ceiling box is fan-rated and properly braced, ceiling height or slope, and how easy it is to access the area safely. If the box isn’t rated for fan support or the wiring shows heat damage, the electrician will correct that before mounting the fan to meet code and prevent vibration issues. Our electricians routinely handle ceiling fan installs in many Lake Mary homes, so we’re familiar with local attic access and ceiling types.
What can change the price:
- Replacing a non–fan-rated box or adding bracing
- Adding or reconfiguring a wall switch vs. remote control
- Tall or sloped ceilings that need special hardware or ladders
- Limited attic access or any drywall patching handled by others
Turn off power at the breaker before any DIY checks, and stop immediately if you see a plastic or loose ceiling box.
Updated: 2026-06-18
Need help in Lake Mary, FL? Call (407) 710-0921 or book online.
You can fix a wobbling ceiling fan without a balancing kit by correcting loose hardware, truing blade alignment, and confirming the fan is mounted to a fan‑rated box. Most wobble comes from blade screws that have loosened over time or blades that picked up dust and minor warps. Mounting problems or a mis-seated downrod can also transfer shake into the ceiling. Electricians who work in the Sanford area often see wobble worsen after seasonal humidity swings.
Try these focused steps:
- Turn off power at the switch and breaker, then snug the downrod set screw, bracket screws, and every blade and blade‑arm screw.
- Make sure the hanger ball is fully seated and the ceiling box is fan‑rated, not a light‑duty box.
- Clean blades, then test tiny tape weights near blade tips; a dime’s worth of tape is usually enough.
- Swap blade positions to isolate a bad blade; replace any warped or cracked blade.
If the box isn’t fan‑rated or the fan still shakes on low speed, stop and call a licensed electrician.
Updated: 2026-06-18
Need help in Sanford, FL? Call (407) 710-0921 or book online.
Still have questions?
Have questions or need service? Contact our team today to discuss your needs, request a quote, or schedule an appointment.